You found the right lease space, but the electrical was built for the last tenant, or for no tenant at all. The outlets are in the wrong places, the lighting does not suit your work, and nobody can tell you whether the panel can handle your equipment. Before the walls go up and the opening date gets set, the electrical scope needs a plan.
Quick answer: Tenant improvement electrical is the wiring, lighting, power, and panel work needed to adapt a commercial lease space to a specific tenant. A typical scope includes a load review, new circuits and outlets, lighting and controls, data and equipment power, permits, and inspections. Who pays depends on the lease and any tenant improvement allowance.
As a licensed electrical contractor (CSLB #974530), we plan and install this work for business owners and property owners as part of our commercial electrician services. This guide explains what a tenant improvement electrical scope covers, how responsibility is usually divided between owner and tenant, what drives the cost, and how to keep the electrical from becoming the reason your move-in date slips.
What is the meaning of tenant improvements?
Tenant improvements, often shortened to “TI,” are the changes made to the interior of a commercial space so it fits a particular tenant’s use. They are sometimes called leasehold improvements or a buildout. A TI can be as small as adding a few dedicated circuits and new lighting in an existing office, or as large as building out an empty “cold shell” with no interior walls, ceilings, or finished electrical at all.
The electrical portion is almost always part of the job, because every change to walls, ceilings, and floor layout affects where power, lighting, switches, and data need to go. Even a tenant who keeps the existing walls usually needs electrical changes for workstations, equipment, signage, or updated lighting controls.
It helps to know what condition the space is in when you take it over:
- Cold shell or “dark” shell: The building envelope is complete, but the interior has little or no finished electrical. The tenant improvement must provide nearly everything, often starting from a service or a single panel location.
- Warm shell: Basic building systems are in place, such as an electrical service and panel sized for the suite, and sometimes restrooms and a basic ceiling. The TI adds the distribution, lighting, and devices the tenant needs.
- Second-generation space: A space a previous tenant already built out. The TI modifies, removes, or reuses what is there. This is common in established retail centers and office parks in Temecula and Murrieta.
What a tenant improvement electrical scope usually covers
Every buildout is different, but most tenant improvement electrical scopes are built from the same set of components. The table below shows what each part involves and the questions we ask during planning.
| Scope item | What it involves | Questions we ask during planning |
|---|---|---|
| Load review and service capacity | Checking the existing service, panel, and available capacity against the new tenant’s planned equipment | What equipment are you bringing? Is any of it 208-volt or three-phase? |
| Panel and distribution | Adding or replacing a suite panel, subpanels, breakers, and feeders | Is there room for new circuits? Does the landlord require a separate meter or panel? |
| Branch circuits and receptacles | General-purpose and dedicated circuits, floor boxes, and outlets for workstations and equipment | Where will desks, counters, and equipment sit? Which items need their own circuit? |
| Lighting and controls | New fixtures, layout changes, switching, occupancy sensors, daylight and dimming controls | What tasks happen in each area? Are existing fixtures worth reusing? |
| Emergency and exit lighting | Exit signs and emergency egress lighting that match the new floor plan | Has the egress path changed with the new wall layout? |
| HVAC and equipment connections | Power and disconnects for new or relocated HVAC units, water heaters, and other fixed equipment | Is the mechanical contractor adding or moving units? |
| Low-voltage pathways | Boxes, rings, and conduit for data, phone, security, and AV cabling installed by others | Who is your IT or security vendor, and what do they need from us? |
| Signage and exterior power | Circuits and time controls for building or storefront signage | Does the landlord have sign criteria or an existing sign circuit? |
| Demolition and make-safe | Removing abandoned wiring and devices from the prior tenant and making the remaining circuits safe | What is staying, and what is being removed? |
Not every project includes every line. A professional office moving into a second-generation suite may only need receptacle changes, a few dedicated circuits, and a lighting update. A restaurant or medical office in a cold shell may need nearly all of it.
What is the difference between tenant improvements and renovations?
The two overlap, but the difference is mostly about who the work is for and when it happens. A tenant improvement is done to prepare a lease space for a specific tenant, usually at the start of a lease or a renewal, and it is defined by the lease terms. A renovation is a broader term for upgrading a building or space, often by the owner, and it may happen whether or not a new tenant is coming in.
For the electrical work itself, the practical difference is coordination. A renovation for an owner-occupied building has one decision-maker. A tenant improvement often has two or three: the property owner, the tenant, and sometimes a general contractor or property manager, each with their own requirements. The lease and the landlord’s construction rules may control things like which contractors are allowed, when noisy work can happen, where panels can go, and how work in shared spaces such as electrical rooms and roofs is handled.
Who usually pays for tenant improvements?
It depends on the lease. There is no single rule, and the answer is negotiated before the lease is signed. In general, there are a few common arrangements:
- Landlord-built (“turnkey”): The landlord builds out the space to an agreed plan and delivers it ready to occupy. The cost may be reflected in the rent.
- Tenant improvement allowance: The landlord contributes a set amount toward the buildout, and the tenant manages the work. Costs above the allowance are usually the tenant’s responsibility.
- Tenant-paid: The tenant pays for the improvements, sometimes in exchange for lower rent or a longer free-rent period.
- Split responsibility: The landlord provides certain base-building items, such as an adequately sized electrical service to the suite, and the tenant pays for everything inside the suite.
For electrical work, that last point matters. If the existing service or panel cannot support your planned equipment, the question of who pays for a capacity upgrade can be one of the largest numbers in the project. It is worth getting our assessment before the lease is final so the responsibility for that work is clearly written down.
How does a tenant improvement allowance work?
A tenant improvement allowance is money the landlord agrees to contribute toward the cost of building out the space. The lease spells out the amount, often stated per square foot, what it can be spent on, and how it is paid. Some landlords pay contractors directly, while others reimburse the tenant after the work is complete and lien releases, invoices, and permit sign-offs are provided.
From our side, the allowance affects how we present the electrical scope. We break our proposal into clear line items so you can see which parts are base-building work, which parts are tenant-specific, and which items could be phased or simplified if the total needs to stay within the allowance. We do not give lease or tax advice, so for questions about how the allowance is structured or accounted for, talk to your broker, attorney, or accountant.
Start with the existing electrical: capacity, panels, and condition
The most expensive surprise in a buildout is finding out late that the space does not have enough electrical capacity. That is why our first step on any tenant improvement is a site visit to review what is already there.
We look at the size and voltage of the service feeding the suite, whether the building is single-phase or three-phase, how much room the existing panel has for new breakers, and the condition and labeling of the existing equipment. In second-generation space, we also identify circuits left behind by the previous tenant, abandoned wiring above the ceiling, and equipment that is no longer needed.
Then we compare that against what you plan to install. A typical office mostly needs general receptacles, lighting, and a few dedicated circuits for copiers, kitchenettes, and server equipment. A salon, fitness studio, light manufacturing shop, or commercial kitchen can need much more, including 208-volt or three-phase circuits for specific equipment. Equipment spec sheets help us size circuits correctly, so we ask for them early.
If the space needs more capacity, the solution might be a new suite panel, a subpanel, a feeder upgrade, or in some cases a service upgrade that requires coordination with Southern California Edison. Our guide to commercial electrical panel upgrades for growing businesses explains the signs and options in more detail. Utility work has its own timeline, so it needs to be identified at the start, not discovered halfway through construction.
Planning the electrical around how you will use the space
A good tenant improvement electrical plan starts with your floor plan and equipment list, not with a generic outlet count. The same square footage can need very different electrical work depending on the business.
Offices and professional services
Office buildouts focus on workstation power, conference room AV, a break room or kitchenette, and server or network equipment. Floor boxes may be needed for open-plan desks or conference tables. Lighting usually needs to work well for screens, with controls that meet the energy code.
Retail
Retail spaces need flexible power for displays and point-of-sale stations, accent and display lighting, and signage circuits. Many tenants change merchandise layouts over time, so we plan for flexibility. Our post on retail store electrical upgrades covers these needs in more depth.
Medical, dental, and wellness
Healthcare tenants often have dedicated equipment circuits, specific receptacle requirements in patient care areas, and imaging or sterilization equipment with exact power needs. These spaces deserve extra planning time. See our guide to medical and dental office electrical requirements for details.
Food service and restaurants
Restaurants and cafes are among the most electrically demanding tenant improvements, with cooking equipment, refrigeration, hood systems, and water heating all requiring dedicated, correctly sized circuits. These projects often reveal capacity limits in spaces that were previously offices or retail.
Light industrial and flex space
Flex and warehouse-style suites may need three-phase power for machinery, compressors, or chargers, plus high-bay lighting and loading door power. Equipment placement drives the entire layout, so we work from your equipment list and floor plan together.
Permits, plans, energy code, and inspections
Most tenant improvement electrical work requires a permit from the city building department. Larger projects typically go through plan review, where the city checks the drawings before construction starts, and the electrical work is inspected during and after construction. The approved permit and final inspection are also documents your landlord, insurer, and allowance reimbursement may require.
Commercial lighting work in California also falls under the state energy code, Title 24, Part 6. When lighting is added or altered in a nonresidential space, the code sets requirements for lighting power and controls, such as automatic shutoff, occupancy sensing, and daylight-responsive controls in some areas. Lighting controls on many projects must also pass acceptance testing before the work is complete. The details depend on the size and type of the alteration, which is why we plan lighting with the energy code in mind from the beginning rather than trying to fix compliance during inspection.
Other trades and reviews can affect the electrical schedule as well. If the project changes fire alarm or fire sprinkler systems, those reviews run on their own track. If the floor plan changes the exit path, the exit signs and emergency lighting need to follow it. We keep all of these in view so the electrical inspection is not the last item holding up your certificate of occupancy or final sign-off.
What affects the cost of tenant improvement electrical
We cannot give a meaningful price without seeing the space and the plan, because two suites of the same size can have very different scopes. These are the factors that move the number most:
| Cost factor | Tends to lower cost | Tends to raise cost |
|---|---|---|
| Starting condition | Second-generation space with usable circuits and fixtures | Cold shell with little or no finished electrical |
| Electrical capacity | Existing panel has room and adequate service | New panel, feeder, or service upgrade needed |
| Type of use | General office with standard receptacles | Kitchens, medical, salons, or machinery with dedicated circuits |
| Lighting | Reusing compliant fixtures and controls | Full new lighting layout with advanced controls |
| Ceiling and wall access | Open ceilings or accessible drop ceilings | Hard-lid ceilings, concrete floors needing trenching or core drilling |
| Schedule | Normal working hours with clear access | After-hours work, occupied buildings, or compressed timelines |
| Design changes | Layout finalized before construction | Changes after rough-in that require rework |
A written proposal from us lists what is included, such as permits, materials, labor, fixtures, and inspection coordination, and what is not, such as low-voltage cabling installed by others or utility fees. That clarity makes it easier to compare proposals and to manage a tenant improvement allowance.
Scheduling and coordination with owners, tenants, and other trades
The electrical work runs through the whole project, so it has to be coordinated with everything else. A typical sequence looks like this:
- Before the lease is final: Site assessment and capacity review so responsibility for major electrical items is clear.
- Design and permitting: Electrical layout based on the floor plan and equipment list, then permit submittal and plan review when required.
- Demolition: Making the space safe and removing abandoned wiring from the previous tenant.
- Rough-in: Installing boxes, conduit, wiring, and panels inside open walls and ceilings, followed by a rough inspection before walls are closed.
- Finish: Installing devices, fixtures, panel covers, and equipment connections after drywall and paint.
- Testing and final: Testing circuits and controls, completing panel labeling, and passing final inspection.
The two most common causes of electrical delays are late equipment decisions and layout changes after rough-in. If you can confirm equipment models and furniture layouts before rough-in begins, the electrical work usually stays on schedule. If you are evaluating contractors for this work, our guide on how to hire a commercial electrical contractor in Temecula lists the questions worth asking.
When to call a licensed electrician (and what not to DIY)
Commercial tenant improvements are not a place for do-it-yourself electrical work. Commercial panels and feeders carry more available fault current than most residential systems, the work is permitted and inspected, and the landlord and insurer will typically require that it be done by a licensed contractor. Unpermitted or incorrect work can delay your opening, cause a failed inspection, or create problems when you renew, sell, or make an insurance claim.
Call a licensed electrician:
- Before you sign the lease, to confirm the space can support your equipment.
- When you need new circuits, outlets, lighting, or panel changes of any size.
- When you are moving equipment that needs 208-volt or three-phase power.
- When the previous tenant left behind wiring or equipment you are not sure is safe.
- When breakers trip, outlets feel warm, or you notice burning smells in the space.
What tenants can do on their own is plan: gather equipment spec sheets, draft the furniture layout, confirm the landlord’s construction rules, and coordinate with IT and security vendors. That preparation makes our part faster and more accurate.
How we handle tenant improvement electrical
We work with business owners and property owners on commercial electrical projects in Temecula and Murrieta, and our process for a tenant improvement follows the same steps every time:
- Assessment: We visit the space, review the existing service and panels, and talk through your floor plan, equipment, and timeline.
- Scope and proposal: We provide a written, itemized proposal that separates base-building items from tenant-specific work, so owners and tenants can see what applies to them.
- Permits: When the work requires a permit, we pull it and handle the electrical portion of plan review and inspections.
- Installation: Our licensed electricians complete demolition, rough-in, and finish work in coordination with your landlord’s rules and any other trades on site.
- Inspection and testing: We test circuits and controls, label panels accurately, and schedule the required inspections.
- Cleanup and closeout: We clean up our work areas and provide the documentation you need for the landlord, your records, and any allowance reimbursement.
We hold CSLB license #974530 and carry insurance, and we can provide documentation your landlord or property manager requests before work begins.
Plan your tenant improvement electrical with us
The earlier we see the space, the fewer surprises you will face. Whether you are a tenant comparing lease options or a property owner preparing a suite for a new business, contact Lock and Alert Electrical to schedule a site assessment. You can also learn more about our team and services on our homepage.
Frequently asked questions about tenant improvement electrical
What is a tenant improvement allowance?
A tenant improvement allowance is money a landlord agrees to contribute toward building out a lease space. The lease defines the amount, what it covers, and how it is paid, either directly to contractors or as reimbursement after completion. We itemize our electrical proposals so you can see which costs fit within the allowance and which may fall to you.
What is a reasonable tenant improvement allowance?
A reasonable allowance depends on the space, the market, the lease length, and how much work the space needs. A cold shell usually justifies more than a second-generation space that needs only light changes. We cannot advise on lease terms, but an early electrical assessment from us gives you real scope information to bring to that negotiation.
How is a tenant improvement allowance calculated?
An allowance is usually calculated as an amount per square foot of the leased space, though some landlords set a fixed total instead. The figure is negotiated and written into the lease. To know whether it will cover your buildout, you need contractor estimates for each trade, including electrical, before you sign.
Do you have to pay back a tenant improvement allowance?
Usually not, as long as you fulfill the lease, but the lease controls this. Some leases require repayment of unamortized improvement costs if the tenant leaves early, and some build the allowance into the rent. Review those terms with your broker or attorney. We focus on documenting the electrical work clearly so your reimbursement paperwork is complete.
How should we approach negotiating a tenant improvement allowance?
Start with accurate cost information before you negotiate. A site assessment from us identifies capacity issues, panel upgrades, and equipment circuits that could change the budget significantly. With that information, you and your broker can ask the landlord to cover base-building items, such as service capacity, separately from your tenant-specific work.
Who handles shell and tenant improvement work?
Shell work is typically handled by the developer or owner’s contractor, while tenant improvement work is handled by contractors hired by the tenant or landlord for a specific suite. On the electrical side, we can handle the tenant improvement scope for owners and tenants, and we coordinate with whoever is responsible for the base building.
What is tenant improvement in construction?
In construction, a tenant improvement is the interior buildout of a commercial space for a specific occupant. It typically includes walls, ceilings, finishes, plumbing, HVAC changes, and electrical work. For the electrical trade, it means designing and installing power, lighting, and controls to match the new floor plan and passing the required inspections.
What does a tenant improvement contractor do?
A tenant improvement contractor plans, permits, and builds the changes a commercial space needs for a new tenant. As the electrical contractor, we assess capacity, design the layout, pull electrical permits when required, install wiring, panels, lighting, and devices, and coordinate inspections and closeout documentation with the owner and tenant.
Are leasehold improvements depreciated?
Generally, yes, leasehold improvements are treated as business assets that are depreciated or amortized, but the rules are specific and change over time. Electrical work is often part of those improvements. Your accountant should decide how to treat it. We can provide itemized invoices that make it easier for them to categorize the work.
What are some examples of betterments and improvements?
Electrical examples include new or upgraded panels, added circuits and receptacles, new lighting and lighting controls, dedicated equipment circuits, and signage power. Other trades contribute items like new walls, flooring, and HVAC changes. In a lease, these are often called betterments and improvements, and they are usually treated differently from the base building.
Can a commercial tenant remove improvements?
It depends on the lease. Many leases say permanent improvements, such as wiring inside walls and installed panels, stay with the building, while the tenant can remove trade fixtures and equipment. Some leases require the tenant to restore the space when leaving. If removal is required, we can safely disconnect and make the electrical safe.
Do we need a permit for tenant improvement electrical work?
In most cases, yes. Adding circuits, changing panels, or altering lighting in a commercial space typically requires a permit from the city building department, and larger projects may require plan review. When a permit is required, we pull it and schedule the electrical inspections, so the work is documented for your landlord and insurer.
How long does tenant improvement electrical work take?
The timeline depends on the size of the space, the amount of electrical work, plan review time, and equipment lead times. A light refresh may take days, while a full cold-shell buildout takes much longer. We provide a schedule with our proposal and coordinate rough-in and finish work with the other trades.
Can you work within our landlord’s construction rules?
Yes, we follow the landlord’s or property manager’s construction requirements, such as insurance certificates, work hours, access to electrical rooms, and rules for shared areas. Send us the tenant construction guidelines early, and we will build them into our schedule and proposal so nothing has to be renegotiated once work begins.
Can we reuse the existing wiring and fixtures from the previous tenant?
Often, yes, when the existing wiring and fixtures are in good condition, code-compliant, and suited to your layout. Reusing them can reduce cost. During our assessment, we identify what can stay, what should be removed, and what needs to change to meet your needs and current energy code requirements.
Do you work with both property owners and tenants?
Yes, we work directly with property owners preparing suites for new tenants and with business owners building out their own lease space. Either way, we provide a clear, itemized proposal and keep both parties informed when responsibilities are shared, so there is no confusion about who approved and who is paying for each part of the work.